Civic Euro Intake Manifold

This is for anyone with a 92-95 Civic EG with an h22 swap wanting to use the EuroR accord intake manifold. I ran into some problems with a customer car during this install. Its a 94 EG coupe with a h22a1 swap. During this install, the problems we had were the following:

- IACV hits brake proportioning valve. You must either delete the iacv with a blockoff plate or you must fab a way to relocate it. I have been in contact with Rosko on the situation and he will be sending the customer a relocation bracket so we can use the idle control

- throttle cable is too short and the throttle bracket that rosko supplies puts it at the wrong angle for this particular cable. If this was a prelude, it would be a simple bolt on. I was told to use the 1996 civic EX throttle cable but that is not to my availability. No matter how we bent or mounted the bracket, it just didnt give us the length or angle appropriate to install it properly.