Ecu Wiring Table Two

This view of this diagram is looking into the connector on the ENGINE SIDE, NOT the backside where the wires enter the connector.

First connector has 14 pins and is labeled "6P" - female connector ___

1. CYP M ------ 2. TDC M ------ 3. CKP M ------

- 4. INJ1 ----- 5. INJ2 ------- 6. INJ3 -------- 7. INJ2 --

- 8. IACV -----9. TPS ------ 10. SG2 ------ 11. LG1 --

12. CYP P ------13. TDC P -------14. CKP P _

_ Next is a 4 pin connector labeled "Y04"

1. LG2 ------- 2. Primary O2 ----

3. PO2 Heat -- 4. Knock Sensor ----

___ Next Connector is labeled "P - 9" and has 14 pins - Male connector

1. Rad Fan Ctrl ----- 2. Oil sending unit ----- 3. ICM ----

4. ICM (blue) ---- 5. Alt Ctrl -------- 6. Fan/PS switch ground --- 7. PG2

8. ????? ---- 9. ALT (wt/red) ----- 10. ALT (wt/blue) ------ 11. VSS

12. VCC2 (TPS) ------13. IGP2/IGP1 -------- 14. Dead Plug Ground ___

_ Next connector is labeled "P1" and has 10pins

1. Reverse light (female) ------ 2. Reverse light (male) -------3. IAT

4. ECT -----5. Front Fan switch (water neck) ----- 6. VCC1 (MAP) ------ 7. MAP

8. IAB ----------- 9. PS switch ------------ 10. X __